What is the importance of the best Amp For 1200 Watt Subwoofer to you? Congratulations if it is! The service we provide will save you time from reading thousands of reviews.
You might find yourself struggling to narrow down the market because it is filled with so many products. Products for this year are among the top 20 most searched words. These are the results of research over many hours. Let’s find out more!
[aawp bestseller=”amp for 1200 watt subwoofer” template=”table” items=”7″]
Top 10 Best Amp For 1200 Watt Subwoofer
Here are the top Amp For 1200 Watt Subwoofer we picked, check their features.
1. Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor – 150<
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
| Size | 1200 Watt Class D Monoblock |
| UnitCount | 1 |
2. BOSS Audio Systems R6002 Riot Series Car Audio Stereo Amplifier – 1200 High Output, 2 Channel, Class A/B, 2/4 Ohm, Low/High Level Inputs, High/Low
- Power – 600 Max x 2 @ 2 Ohms, 300 Max x 2 @ 4 Ohms, 1200 Max Bridged x 1 @ 4 Ohms
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Specs – Dimensions: 12.28” x 10.44” x 2.25”, Weight: 5.86 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 25 Amp ATO Blade
- Warranty – BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
| IsAdultProduct | |
| Size | 1200 WATTS |
| UnitCount | 1 |
3. Rockville RV12.2B 1200W Dual 12″ Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
- Rockville RV12.2B 1200W dual 12″ Car Subwoofer Enclosure amplifier+amp kit
- Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
- Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12″ Subwoofers.
- 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz – 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
- 17″ High grade twisted pair 100% Copper RCA cables. 17′ 8 gauge translucent Blue Super flex Power cable. 3′ 8 gauge clear super flex ground wire. 17′ 18 gauge Blue remote cable. 17′ 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder
| Color | black |
| UnitCount | 1 |
4. Rockville SK510 PACKAGE 10″ 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp
- Loaded Sub Enclosure Features: Rockville Single 10″ K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts
- Vent dimensions (inches): 2″ x 6.5″ x 8″, Tuning frequency of enclosure: 35 Hz, 2″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
- Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings
- Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) – 2 Ohm: 1400 Watts x 1 Channel, – 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply
- Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable
| UnitCount | 1 |
5. BOSS Audio Systems BAB10 Amplified Car Subwoofer – 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicl
- BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
- PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- DIMENSIONS: 14 inches in Depth, 12. 3 inches in Width and 3. 3 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
- : BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality
| Color | black |
| Size | 10 inch Speaker S |
6. Hifonics BXX1200.1D Brutus Class D 1200W RMS 1 Ohm Mono Car Subwoofer Amplifier
- The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about.
- The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music.
- The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.
- Max Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. 1 ohm: 1200 watts x 1 chan.
- Dimensions: 9″W x 13.25″L x 2.5″H, 1-year Manufacturer’s Warranty
| IsAdultProduct | |
| ReleaseDate | 2018-07-01T00:00:01Z |
| UnitCount | 1 |
7. Kicker 46CXA1200.1 1200-Watt Class D Monoblock Subwoofer Amplifier
- KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies.
- 24dB subsonic filter for protection from potentially damaging frequencies. FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation.
- Compatible with CXARC Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 15.75 inch x 9 inch x 4 inch. Weight: 7.75 lbs.
- Specifications: Power Rating: 4 ohms: 600 watts x 1 chan., 2 ohms: 1200 watts x 1 chan., 1 ohms: 1200×1 +/-10% chan.
- CXRC Remote Bass Capable (sold sep.). Dimensions: 12 in. (30,6 mm). Frequency Response: 25 – 200Hz. Input sensitivity: Low level: 250mV-10V ; High level: 1V-40V. Signal to Noise Ration: 95dB. Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave. Subsonic Filter @ 25hz, 24db/octave. KickEQ Boost: Variable 0-6dB @40Hz.
| UnitCount | 1 |
8. Rockville Rws12ca Slim 1200 Watt 12″ Amplified Powered Car Subwoofer Enclosure
- Rockville Rws12ca slim 1200 Watt 12″ Amplified powered car Subwoofer Enclosure.
- 1200 watts peak power output. 300 watts RMS. 12″ Super slim subwoofer.
- Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.
- High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
- Vented core magnet motor structure. 2″ High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
- Magnet motor structure. Super slim sealed MDF enclosure design. Aviation grade black tweet Carpet with embroidered logo.
- Black texture synthetic Leather front panel. Impedance: 4-ohms. Frequency Response: 38hz-500hz. Spl @ 1W/1M: 96Db.
- Dimensions: 24″ Length x 15″ Height 4.37″ Top depth x 6.65″ Bottom depth. Built-in 300 watts RMS/ 1200 Watt mono block amplifier.
- 150Mv – 5V variable input level. 24Db low Pass Crossover frequency 50hz-250hz. Low level RCA inputs.
- High level speaker level input with auto start music sense. RJ11 jack for dash mounted bass remote.
| Color | Black |
| ReleaseDate | 2019-05-07T00:00:01Z |
| Size | 12” |
| UnitCount | 1 |
9. BOSS Audio Systems R3004 4 Channel Car Amplifier – 1200 Watts, 2/4 Ohm Stable, Class A/B, Full Range, Bridgeable, MOSFET Power Supply, Remote Subwo
- Power – 300 Watts Max x 4 @2-Ohms, 150 Watts Max x 4 @4-Ohms, 600 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Fixed High-Pass Crossover – Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs – Dimensions: 12.28” x 10.44” x 2.25”, Weight: 6.28 lbs.
- Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
| IsAdultProduct | |
| ReleaseDate | 2011-10-13T00:00:01Z |
| Size | 1200 WATTS |
| UnitCount | 1 |
10. Black Diamond Dia-AK4 Amplifier Wiring Kit – 4 Gauge Amp Kit 1200W Amp Installation Cable Kit – Ampkit4 Helps Make Connections, Brings Power t
- COMPLETE AMPLIFIER WIRING KIT – AK4 is a perfect set to install 1 amplifier. 4 Gauge Installation cables 1200W that come with an ANL fuse holder with 80 amp fuse
- BLACK/RED WIRE – 17ft 2-channel shielded twisted pair of RCA premium audio cable inter-connections
- INSTALLATION PACKAGE – Install the amp wiring kit to 1 amplifier. All wire terminals, connectorss, wire ties, and wire loom are included in the box for simple installation
- HIGH QUALITY MATERIALS – Super flex twist premium cables & Copper-Clad Aluminum (CCA) wires. Only the best materials are used with each kit
Factors You Need to Consider When Buying Amp For 1200 Watt Subwoofer from Online Stores
When you need to purchase a Amp For 1200 Watt Subwoofer, you will need to make sure that you are not getting a Amp For 1200 Watt Subwoofer that won’t provide you with a high-quality experience. The Amp For 1200 Watt Subwoofer is a huge investment that you need to keep safe. This means that you will need to make sure that you are not getting a product that is not safe to use. So, here’s how you need to consider your options carefully.
Standards
The first thing to consider is the standards of the Amp For 1200 Watt Subwoofer. The standards will determine what type of safety precautions need to be taken when you use the Amp For 1200 Watt Subwoofer. It is important that you are aware of the risks involved in using the Amp For 1200 Watt Subwoofer.
Placement
The placement is the place where you will put the Amp For 1200 Watt Subwoofer. This kind of information is going to determine whether or not you can use the Amp For 1200 Watt Subwoofer in a way that is going to work. This is one of the most important things that you need to consider.
Usage
The usage of the Amp For 1200 Watt Subwoofer is going to determine how long you will be able to use the Amp For 1200 Watt Subwoofer. It is important that you are aware of your usage needs in a particular situation.
Durability
The durability of the Amp For 1200 Watt Subwoofer is going to affect how long it will last. So, it is important that you get a Amp For 1200 Watt Subwoofer that is durable.
Maintenance
The maintenance of the Amp For 1200 Watt Subwoofer is going to determine how much maintenance you are going to need. It is important that you get a Amp For 1200 Watt Subwoofer that is easy to maintain.
Customer Service
It is important that you get a Amp For 1200 Watt Subwoofer that has a great customer service. This is often going to determine how long you are going to be able to use the Amp For 1200 Watt Subwoofer.
Warranty
The warranty of the Amp For 1200 Watt Subwoofer is going to determine how long you will have to pay for the Amp For 1200 Watt Subwoofer after it gets defected. It is important that you get a Amp For 1200 Watt Subwoofer that comes with a great warranty.
Repair
The conditioning is going to determine how much time you need to spend on repairing the Amp For 1200 Watt Subwoofer. It is important that you get a Amp For 1200 Watt Subwoofer that comes with a great repair program.
User Experience
The user experience is going to determine how easy it is to use the Amp For 1200 Watt Subwoofer. It is important that you get a Amp For 1200 Watt Subwoofer that provides you with a great user experience.
Warranty and Service
The warranty and service of the Amp For 1200 Watt Subwoofer are going to determine the length of time that you will have to pay for the Amp For 1200 Watt Subwoofer.
Final Words
We have discussed some of the best Amp For 1200 Watt Subwoofers that a person can buy in the market. It is important that a person chooses the best Amp For 1200 Watt Subwoofer for them, as the wrong product can lead to many health problems. It is important to read reviews and compare Amp For 1200 Watt Subwoofers before making a purchase.